Geodis integration: labels, manifests and tracking
The Geodis integration connects the myFulfillment packing station to the carrier's Webservices. A checked order becomes a Geodis shipment, the label returns to the same workflow and tracking stays attached to that shipment. The merchant keeps its own Geodis shipper account and transport contract.
Carrier label
GeodisGeodis1.2 kg
- Boostmyshop product
- myFulfillment
- Category
- Carriers
- Connects
- Geodis Distribution & Express for parcels and pallets in France and Europe
- Account required
- Geodis shipper account with API access enabled
- Integration cost
- Boostmyshop module included with myFulfillment · transport billed on your Geodis contract
- Sync frequency
- At shipment creation, then on the configured tracking schedule
- Data direction
- Shipment sent to Geodis · label and tracking returned
- Developed by
- Boostmyshop
- Supported by
- Boostmyshop
- Sovereignty
- French (Geodis, SNCF group)
- Vendor
- Geodis
- Last updated
- 2026-09-11
How Geodis fits with myFulfillment
What is Geodis?
Geodis Distribution & Express transports parcels and pallets in France and across Europe. Its Shipment API lets shipper customers register and validate shipments, then print the labels. The Zoom API provides shipment tracking. myFulfillment places those exchanges inside the warehouse workflow for merchants shipping from France. Orders from connected sales channels enter one OMS, go to the right site and pass checks before packing. When the operator selects Geodis, the Boostmyshop module sends shipment data, retrieves the label and stores the tracking number with the order. The integration does not replace the Geodis customer portal or transport contract. It removes the extra step of entering the same data again between parcel or pallet preparation and manifest validation.
Your operations cover orders, barcode checks, and label creation.
Prepares shipment data and prints the Geodis label at packing.
Parcel handed over to Geodis.
Geodis integration in the shipping workflow
Any eligible order already in myFulfillment can ship with Geodis, regardless of the storefront that created it. The OMS centralizes the order, the warehouse checks it, and the connector creates the shipment while keeping the label and tracking in the same record.
myFulfillment runs the picking, Geodis prints the label
At the packing station, myFulfillment registers the shipment with Geodis and retrieves the label in the same action. The address and parcel or pallet data come from the checked order.
Geodis label returned when the shipment is registered
See the featureGeodis returns the tracking number with the label. myFulfillment then queries the Zoom service for status and events, keeping that tracking history with the relevant shipment.
Number at creation, Geodis events on the configured tracking schedule
See the featureFor a Geodis shipment, the carrier rule presents allowed services and their configured rates based on weight, destination and shipping unit. The operator makes the final choice before the label is created.
See the featureEligible orders already centralized in myFulfillment can ship with Geodis regardless of their storefront source. The team filters orders, assigns the warehouse and chooses transport in one place.
Orders from connected channels enter the OMS before Geodis is selected
See the featureAn order assigned to Geodis follows myFulfillment receiving and fulfillment checks. The operator verifies the item and shipping unit before producing the parcel or pallet label.
See the featureWhat syncs, and when
| Data | When |
|---|---|
| In | |
| Eligible order | in the OMS before carrier selection |
| Geodis label | with the shipment creation response |
| Tracking number | with the Geodis label |
| Geodis tracking events | on the schedule configured in myFulfillment |
| Out | |
| Geodis shipment | at packing, after the operator check |
| Geodis manifest | when the manifest is validated |
When Geodis is enough, and when myFulfillment makes the difference
Geodis provides the network and Webservices. myFulfillment fits warehouses that need to create, print and track shipments without separating fulfillment from transport.
- An official API for registering, validating and labeling shipments
- Distinct services for parcels and pallets in France and Europe
- Geodis tracking kept with the fulfilled order
- A Geodis shipper account and Geodis API rights are required.
- Available services depend on the contract enabled by Geodis.
- The connector covers transport operations; Geodis remains responsible for carriage and delivery.
| Solution | Orders from several channels | Warehouse check before the label | Geodis label | Geodis manifest | Tracking linked to the order | Choice across carriers |
|---|---|---|---|---|---|---|
Geodis with myFulfillmentRecommended | Supportedcentralized in the OMS | Supportedin the fulfillment workflow | Supportedat the packing station | Supportedwith fulfilled shipments | Supportedin myFulfillment | Supportedthrough carrier rules |
Geodis customer portal only | Not supportedshipment-by-shipment entry | Not supportedoutside the warehouse flow | Supportedin the portal | Supported | Partially supportedSeparate lookup | Not supportedGeodis only |
Multi-carrier platform | Partially supportedDepends on the platform | Partially supportedDepends on the available WMS functions | Supportedwhen supported | Partially supportedDepends on the platform | Partially supportedDepends on the connected channel | Supporteddepending on the offer |
Comparison based on the official documentation and myFulfillment docs. The limit is stated under the "Partial" badge; no rating, no sponsored placement.
See how the Geodis integration fits into your operations
How our customers use Geodis day to day
In the warehouse, Geodis enters the workflow after the order check. The operator selects an allowed service, creates the shipment, prints the label and adds the parcel or pallet to the manifest without leaving myFulfillment.
Recipient details and parcel measurements come from the checked order. The shipment is registered and the Geodis label returns to the same packing station.
The rule uses the shipping unit, weight and destination. The operator approves the Geodis service before printing the label.
The Geodis number returned at creation remains attached to the shipment. The team handling delivery follow-up can also see the statuses retrieved through the Zoom API.
Five storefronts, twenty marketplaces and four carriers including Geodis: labels had to remain inside one fulfillment workflow.
One A4 pick sheet with the Geodis label built in, followed by tracking sent to every channel after the scan.
Read the full storyConnect Geodis to your other tools, via myFulfillment
myFulfillment sits in the middle, so Geodis can create labels for orders received from your sales channels. A few live pairings below.
Shopify × Geodis
Your Shopify store orders are prepared in myFulfillment; the Geodis label is printed during packing.
Guide
Amazon × Geodis
Amazon orders are centralized in myFulfillment; the Geodis label is printed during packing.
Guide
BigCommerce × Geodis
Your BigCommerce store orders are prepared in myFulfillment; the Geodis label is printed during packing.
Guide
Fnac / Darty × Geodis
Fnac / Darty orders are centralized in myFulfillment; the Geodis label is printed during packing.
Guide
Leroy Merlin × Geodis
Leroy Merlin orders are centralized in myFulfillment; the Geodis label is printed during packing.
Guide
Magento × Geodis
Your Magento store orders are prepared in myFulfillment; the Geodis label is printed during packing.
Guide
ManoMano × Geodis
ManoMano orders are centralized in myFulfillment; the Geodis label is printed during packing.
Guide
Mirakl × Geodis
Mirakl orders are centralized in myFulfillment; the Geodis label is printed during packing.
Guide
PrestaShop × Geodis
Your PrestaShop store orders are prepared in myFulfillment; the Geodis label is printed during packing.
Guide
Temu × Geodis
Temu orders are centralized in myFulfillment; the Geodis label is printed during packing.
Guide
Veepee × Geodis
Veepee orders are centralized in myFulfillment; the Geodis label is printed during packing.
Guide
WooCommerce × Geodis
Your WooCommerce store orders are prepared in myFulfillment; the Geodis label is printed during packing.
Guide
Cdiscount × Geodis
Cdiscount orders are centralized in myFulfillment; the Geodis label is printed during packing.
Connect Geodis to myFulfillment, step by step
- 1Open a Geodis shipper account, then ask your Geodis representative to enable the required APIs.
- 2During onboarding, ask the Boostmyshop team to enable Geodis in the myFulfillment integration setup.
- 3Validate the connection in the Geodis test environment before using the production key created in the Geodis customer portal.
- 4Map the allowed Geodis services to your rules for weight, destination, parcels or pallets.
- 5Test one complete shipment, including creation, label, manifest and tracking update, before opening the production workflow.
A Geodis shipper account and access to the relevant APIs are required. Geodis enables the rights and supplies the test environment; the Boostmyshop team configures the module in the myFulfillment integration setup. Verified connector scope covers parcel or pallet shipment creation, labels, configured rates, manifests and tracking. Any additional Geodis service is checked during scoping.
Geodis: frequently asked questions
Pricing, contract, carriers, Shopify, pickup points, worldwide selling and shipping: answers on the Geodis integration.
First open a Geodis shipper account and ask your representative to enable the required APIs. During onboarding, the Boostmyshop team activates Geodis in the integration setup, checks the test environment and validates one complete shipment before production.
Yes. Geodis reserves its production APIs for shipper customers. Transport and services remain billed on your Geodis contract; the Boostmyshop module uses that account without replacing it.
The Geodis Shipment API covers shipment registration and validation as well as label printing. The Zoom API supplies tracking data. This page describes only the functions verified in the Boostmyshop connector.
Yes. After the order check, myFulfillment sends the shipment to Geodis and retrieves the label document. The operator prints it at the packing station without re-entering the address or the parcel or pallet data in the Geodis customer portal.
The tracking number returns when the shipment is created. myFulfillment then queries the Geodis Zoom service on the configured schedule, records the status and events, and keeps that information with the relevant shipment.
Yes, once their eligible orders are in myFulfillment. The OMS centralizes those orders before carrier selection, so Geodis can be used without building a separate carrier connection for every sales channel.
Yes. The connector exposes Geodis parcel and pallet services, including express variants. The services actually available depend on your contract and are mapped to transport rules during setup.
Transport remains tied to your Geodis contract. In myFulfillment, allowed services and their configured rates feed the selection rule using weight, destination and shipping unit. The system proposes an option, and the operator approves it.
Explore other integrations
Geodis covers shipping. Connect your sales channels and tools too.
Geodis integration: labels, manifests and tracking
See it in your own setup